Victron Battery Monitor BMV-712 BLACK Smart

Battery Monitor BMV-712 Smart
Supply voltage range 6.5 - 70 VDC
Current draw, back light off < 1 mA
Input voltage range, auxiliary battery 6.5 - 70 VDC
Battery capacity (Ah) 1 - 9999 Ah
Operating temperature range -40 +50 °C (-40 – 120 °F)
Measures voltage of second battery, or
temperature, or midpoint Yes
Temperature measurement range -20 +50 °C
VE.Direct communication port Yes
Bistable relay 60V / 1A normally open (function can be inverted)
RESOLUTION & ACCURACY (with a 500 A shunt)
Current ± 0.01 A
Voltage ± 0.01 V
Amp hours ± 0.1 Ah
State of charge (0 – 100%) ± 0.1 %
Time to go ± 1 min
Temperature (0 - 50°C or 30 - 120°F) ± 1 °C/°F
Accuracy of current measurement ± 0.4 %
Accuracy of voltage measurement ± 0.3 %
INSTALLATION & DIMENSIONS
Installation Flush mount
Front 63mm diameter
Front bezel 69 x 69mm (2.7 x 2.7 inch)
Shunt connections bolts M10 (0.3937 inch)
Body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch)
Protection category IP55 (not intended for outdoor use)
STANDARDS
Safety EN 60335-1
Emission / Immunity EN 55014-1 / EN 55014-2
Automotive ECE R10-4 / EN 50498
ACCESSORIES
Shunt (included) 500 A / 50 mV
Cables (included) 10 meter 6 core UTP with RJ12 connectors,
and cable with 1Amp slow blow fuse for ‘+’ connection
Temperature sensor Optional (ASS000100000)
STORED TRENDS
Data stored
Battery voltage, Current, State of Charge % as well as
the Aux input (Battery temperature, or midpoint
deviation, or starter battery voltage).

- Battery voltage, current, power, ampere-hours consumed and state of charge
- Remaining time at the current rate of discharge
- Programmable visual and audible alarm
- Programmable relay, to turn off non critical loads or to run a generator when needed
- 500 Amp quick connect shunt and connection kit
- Shunt selection capability up to 10,000 Amps
- VE.Direct communication port
- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
- Wide input voltage range: 6.5 – 70 V
- High current measurement resolution: 10 mA (0.01 A)
- Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and
corresponding alarm and relay settings

Victron